mio-ops/Hardware/raspberry_pi_3_model_B.nix

# Configuration common to all Raspberry Pi 3 Model B devices

{ config, pkgs, lib, ... }:

{

  boot.

  boot = {
    initrd = {
      availableKernelModules = [
        "usbhid"
        "usb_storage"
      ];
    };
    kernelPackages = pkgs.linuxPackages_latest;   # For a Raspberry Pi 2 or 3)
    kernelParams = ["cma=32M"];                   # Needed for the virtual console to work on the RPi 3
    loader = {
      generic-extlinux-compatible = {
        enable = true;    # Enables the generation of /boot/extlinux/extlinux.conf
      };
      grub = {
        enable = false;   # NixOS wants to enable GRUB by default.
      };
      raspberryPi = {
        enable = true;
        version = 3;
        firmwareConfig = [
          "arm_64bit=1"
        ];
      };
    };
  };

  # File systems configuration for using the installer's partition layout
  fileSystems = {
    "/" = {
      device = "/dev/disk/by-label/NIXOS_SD";
      fsType = "ext4";
    };
  };

  # !!! Adding a swap file is optional, but strongly recommended!
  swapDevices = [ { device = "/swapfile"; size = 1024; } ];

  hardware = {
    enableRedistributableFirmware = true;   # Enable support for Pi firmware blobs
  };

}